Eyemax Magic Hybrid 16R User Manual

1Digital Video RecorderUser’s ManualMAGICHYBRID 04/08/08R/16R/16R+LITE 04/08/16HD-SDI 04/08/16R

10CH 1 Product Introduction1-2. Specifications(LITE, continued)ModelLITE Series4 CH 8 CH 16 CHCompact caseNetworkNetwork InterfaceGigabit EthernetSpe

11CH 1 Product Introduction1-2. Specifications(HD-SDI)ModelHD-SDI Series4 CH 8 CH 16R CHCompact case 19” rack typeVideoCamera input4 BNC 8 BNC 16 BNC

12CH 1 Product Introduction1-2. Specifications(HD-SDI, continued)ModelHD-SDI Series4 CH 8 CH 16R CHCompact case 19” rack typeNetworkNetwork Interface

131) Full HD real time and All Hybrid (Hybrid Series only)This DVR can record HD and Full HD video with extreme quality. Also it displays real HD(192

14CH 1 Product Introduction11) Display information in easy-to-understand information methodThis enhanced convenience of user by displaying informatio

15[Front Panel]CH 1 Product Introduction1-4. Name of Each Part1. IR Window : the window for remote controller2. USB ports : These USB ports are for m

16[Front Panel]CH 1 Product Introduction<HYBRID 08R/16R/16R+, HD-SDI 16R>5. IR Window8. USB7. Status Ramps1. Playback Buttons4. Backup Device6.

17CH 1 Product Introduction2.FAN6. LAN7.SPOT5. VGA4.HDMI8. DC 12V10. AUDIO OUT9.SENSOR IN / RELAY / RS48511. AUDIO IN1.EXTEND (option)1. EXTEND (opti

18CH 1 Product Introduction[Rear Panel]<HYBRID 08, LITE 08, HD-SDI 08>3.VIDEO IN2.FAN6. LAN7.SPOT5. VGA4.HDMI8. DC 12V9.SENSOR IN / RELAY / RS4

19CH 1 Product Introduction[Rear Panel]<LITE 16>3.VIDEO IN2.FAN6. LAN7.SPOT5. VGA4.HDMI8. DC 12V9.SENSOR IN / RELAY / RS48511. AUDIO IN1.EXTEND

2Thank you for using our product.1. This is user's manual for Analog / HD-SDI Hybrid DVR(Digital Video Recorder).2. This manual contains product

20CH 1 Product Introduction9. SPOT7. DC12V13. AUDIO OUT14. SENSOR IN / RS485, ALARM OUT2.VIDEO IN10. LAN3. e-SATA5. VGA4.HDMI8. POWER SWITCH12. EXTEN

211. AUDIO IN : RCA audio in terminals. You can record 16 channels at the same time.2. VIDEO IN : This receives images from cameras and sends them to

22CH2. Installation Method and Cautions2-1. Cautions- Avoid installing the product where there are direct rays or it is hot by locating near from heat

23- Keep the power cord untwisted. (May cause fire or electric shock.)- Use proper adapter. (Using too much electric power may cause fire or electric

24Note : This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These

25CAMERAMICCH 2 Installation Method and Cautions2-2 Product InstallationThis product may be composed of camera and monitor in default, and additiona

26v Read this notice before connecting HD-SDI cameras.You cannot mix NTSC and PAL cameras with DVR products.1. Please check the type(NTSC or PAL) of

27CH 2 Installation Method and Cautions2) How to connect external sensorSensor terminal is composed of 1 input channel and 1 output channel. Sensor

28CH 2 Installation Method and Cautions4) Connection Using PTZ cameraIn case of using pan and tilt cameras, connect PAN/TILT DRIVE to product as sho

29CH3. How to Use3-1. General Usage InformationCH 3 How to UseThe DVR system can be operated with a mouse or remote controller under the four main m

3CONTENTSContentsCH 1. Product Introduction`1-1. Product Contents 51-2. Specifications 71-3. Product Characteristics 131-4. Name of Each Part 15CH 2.

30Recording indicatorEvent recording indicatorMotion detection indicatorSensor activation indicatorPOS indicatorCH 3 How to Use3-2. LIVE Mode In thi

DateTimeScreen Split mode changeSequence activationHard drive usageLock/ Unlock indicatorScheduler activation indicator Network connection indicatorAu

323-2-2. LIVE Mode FeatureCH 3 How to Use1) Setup : refer to 3-42) SplitChange video split mode for Live View. 3) Audio OutYou can choose the audio

33CH 3 How to Use6) BackupThere are two ways to enter the backup. The first one is that right click on the live screen, and the second one is that e

34Preset[Enter] Preset setupZoom -/+ You can zoom out/in with mouse or [1]/[2] buttons on the remote controller.Focus -/+You can adjust the focus with

35• Preset : You can enter the preset number using the keypad appearing the preset button or ‘Enter’ button on the remote controller.Run[Enter] Move

36• : If you press Setup using mouse (or [9] button on the remote controller) in PTZ Menu, PTZ setup window will appear. You can set the pan and til

3710) ZoomDigital zoom of live screen for selected channel. It can be 8x zoom and also control the position by mouse dragging.CH 1 (x2)CH 3 How to U

38CH 1 (x2)12) OSDThis feature shows current settings of product through GUI (Graphic User Interface) and INFO button at front side is used for this f

39CH 1 (x2)CH 3 How to Use15) Alarm ControlYou can control all alarms connected and the DVR system buzzer.

4CONTENTSTrouble Shooting 87How to Connect xbox1 89Contents

403-3-1. Search Selection Type1) Time Based search selection • Select the Date you wish to view by selecting a Date from Calendar. • Select time you w

41• Select search date from calendar• Event log will be displayed according to the chosen date• Preview pane above the Event Log will show preview of

424) Thumbnail Search• Select search date from calendar• Choose the channel and interval, then select the time from bar or typing• The selected channe

43Reload all data list. Search option. Backup recorded data to external USB device.Playback recorded data from external USB device.Move to Live video

443-3-2. Play ModeIf you choose ‘Full Screen’, the full screen appear. You can control the play speed in here. ▶ Play Screen GUI1. Split Screen2. Sequ

45Access Setup menu from Right Clicking mouse button to Popup Menu.Configure Display, Record, Device, Network, System which is navigated by clicking o

46Resolution1280x720(60Hz), 1280x720(50Hz), 1280x1024(60Hz),1920x1080(60Hz), 1920x1080(50Hz) Device VGA+HDMI, VGA, HDMISequence dwell time 1 sec ~ 60

47Resolution1280x720(60Hz), 1280x720(50Hz), 1280x1024(60Hz),1920x1080(60Hz), 1920x1080(50Hz) Device VGA, HDMI, NoneMode (Split Screen ) 1, 4, 9, 16 S

48CVBS Choose NTSC or PALMode 1, 4, 9, 16 ScreenSequence dwell time 1 ~ 60 secSkip Video LossSkip a video loss channel for the sequence of the Spot.S

49Brightness Adjust brightnessContrast Adjust contrastSaturation Adjust saturationHue Adjust hueDefault Return to factory default settings.Apply All A

5After removing packing materials of this product, check whether all following contents are included. Main Body (DVR):This converts the analog video a

501) RecordRec type None, Conti, Event, C/EAudio Rec To select audio recording or not.v ALL Apply Apply the setting to whole channel.ContinuousResolut

51v Event recording has priority in recording. In C/E recording, the recording will follow conti recording setup in normal condition while it would fo

52• In recording, Schedule recording setting is most preferred. So if you activate the weekly scheduler, you cannot record manually.• Schedule On : Th

53CH 3 How to Use4) HolidayWith this menu, you can add the holidays. Use the ‘Add’ button for adding the holiday and use the ‘Delete’ or ‘Delete All

545) Event In• With this menu, you can set sensor input, motion detection setup. You can also set each channel individually. • Although you set Motion

553-4-3. Device• Configure and view Camera, Private Zone, Audio, Motion Detection, Alarm Out, PTZ settings and Controller.1) CameraSignal type All vid

562) Private ZoneIf you want to hide some part of the picture for privacy, you can choose the area by dragging the mouse. The selected area will be ch

57Audio 1~4Assign audio input to a video channel.Audio 1~8Audio 1~16Audio Out Select which channel will be heard during Live View. CH 3 How to Use3)

58Sensitivity Low, Mid, HighAll On This will activate the motion detection of the all area. All Off This will deactivate the motion detection of the a

595) Alarm Out• There are 4 types trigger such as sensor input, motion detection, POS and video loss. This setting is related that which trigger will

6After removing packing materials of this product, check whether all following contents are included. CH 1 Product IntroductionMain Body (DVR):This c

605-2) Sensor In• You can choose the action after sensor in between relay, buzzer sound, pop up, spot pop up and HD spot pop up. Also you can choose m

61• Also you can choose more than one action. Furthermore you can set the preset position number by motion detection. If you push the ‘setup’ you can

625-3) Motion Detection• You can choose the action after motion detection between relay, buzzer sound, pop up, spot pop up, and HD spot pop up.• Also

635-4) POS• You can choose the action after POS transaction or video loss between relay, buzzer sound, pop up, spot pop up and HD spot pop up.• Also y

645-5) Video Loss• You can choose the action after motion detection between relay, buzzer sound, pop up, spot pop up, and HD spot pop up.• Also you ca

655-6) Duration• You can choose the duration time from 5 to 60 seconds after motion detection between relay, buzzer sound, pop up, spot pop up, HD spo

665-7) Name• You can set a name of the alarms.CH 3 How to Use

676) PTZConfigure Pan/Tilt/Zoom camera for control via DVR System and Remote client.DriverChoose Driver to be suitable for PAN/TILT Camera manufacture

68v There are more kinds of camera which can be supported. Please contact the tech support to want to know the other cameras.Driver BaudratePELCO D ty

697) ControllerThis sets the ID of remote control and system keyboard. If you have many DVRs in the same place, you can control separately the DVR by

7CH 1 Product IntroductionModelHYBRID Series4 CH 8 CH 8R CH 16R CH 16R+ CHCompact case 19” rack typeVideoCamera input4 BNC 8 BNC 8 BNC 16 BNC 16 BNCI

708) POSThis sets the POS interface(text inserter) with the DVR and cash register.※ If you are using a USB hub, you can use up to 4 USB POS.Channel Se

711. Connect the RS-232 cable or USB to RS232 serial cable between POS and DVR. v How to Connect POS2. To set manually, at first you should know the s

723-4-4. NETWORKConfigure and view Address, Port, DDNS, E-mail, Control and Status settings.1) AddressConfigure Network information for Remote client

732) PortThere are 4 kinds of ports for the case such as watch, search, setup and web. You can individually set the port number of the DVR. The defaul

743) DDNSThis is the function to automatically change the IP of DVR to URL. This product supports the automatic DDNS service using manufacture’s inte

754) E-mailYou can send a notification of events by email. Fill all the information correctly and push the ‘Email Test’. Also you can select each eve

76Sensor Detect a sensor input.Motion Detect a motion detection.Video Loss Detect a video loss.POS Send inserted text of POS to the email.S.M.A.R.T. S

775) StreamingCMS can use the ‘High resolution’ setting in the case of full screen or quad screen, and use the ‘Low resolution’ setting in the case of

786) StatusThis shows the information how many connections and what is the action of each connection.MAC Address This displays MAC address of DVR.Conn

791) Date/Time3-4-5. SYSTEMConfigure and view system Date/Time, User Authority, Storage, System Log and Configuration settingsTimezoneChoose the time

8CH 1 Product IntroductionModelHYBRID Series4 CH 8 CH 8R CH 16R CH 16R+ CHCompact case 19” rack typeNetworkNetwork InterfaceGigabit EthernetSpeed15fp

802) User AuthorityThis sets User authority individually. You can give to each users the authorities such as setup, search, backup, PTZ, network and

813) StorageDisplay the information and usage of the hard disk drives.TotalDisplay all the HDD usage being used for the product. If you press the ‘Ent

82S.M.A.R.T.S.M.A.R.T. On Set whether you want to use S.M.A.R.T. or not (On/Off).Check DayDetermine the date to perform the S.M.A.R.T.The check time i

83Refresh Refresh the system log.Export Export the system log.CH 3 How to Use5) System LogYou may view all System administration log from Setup à Sy

846) ConfigurationShown at the following screen, from Setup à System à Firmware, you may view the current firmware version as well as Upgrade the firm

853-5. Firmware UpgradeIf you want to upgrade, please follow that;1. Download the latest firmware to USB memory root directory. 2. Put this memory to

86If you choose OK, you can see the below download window on the DVR screen.☞ WARNING!!!Do not turn off the power during download procedure. If you po

87Trouble ShootingSymptom Checkpoint Countermeasure● Can't turn on power.● There is no image on monitor● Only INFO OSD is on monitor and no image

881. Connect EXTEND FTP cable to Receiver (upto 350ft/100m). Refer to http://en.wikipedia.org/wiki/Twisted_pair about the FTP cable. Connect Monitor a

893.This is the whole diagram.How to Connect xbox 1v DC POWER : 12V 1A

9CH 1 Product Introduction1-2. Specifications(LITE)ModelLITE Series4 CH 8 CH 16 CHCompact caseVideoCamera input4 BNC 8 BNC 16 BNCIndividual HD/Analog